OpenStack云平台部署

前言：本次部署采用系统的是Centos 8-Stream版，存储库为OpenStack-Victoria版，除基础配置，五大服务中的时间同步服务，七大组件中的nova服务，neutron服务，cinder服务需要在双节点配置外，其他服务配置均在控制节点，neutron配置从公有网络和私有网络中选择一种即可，大多数情况还是选公有网络的配置，此次部署所有密码均为111111，可按自身需要自行配置

安装环境：

• 采用虚拟化软件：VMware Workstation 16 Pro
• 操作系统：Centos 8-Stream
• 控制节点配置：内存4G，CPU4核，磁盘100G，启用虚拟化引擎
• 计算节点配置：内存4G，CPU4核，磁盘100G，启用虚拟化引擎

基础配置(双节点)

Yum源仓库配置

阿里云镜像仓库地址：https://mirrors.aliyun.com，有需要可自行配置，但是这里用不到

（1） 配置Centos 8的源只需改yum仓库.repo文件参数即可如下

#更改CentOS-Stream-AppStream.repo文件，将baseurl参数中的地址改为https://mirrors.aliyun.com

[root@localhost ~]# cd /etc/yum.repos.d/
[root@localhost yum.repos.d]# vi CentOS-Stream-AppStream.repo 
[appstream]
name=CentOS Stream $releasever - AppStream
#mirrorlist=http://mirrorlist.centos.org/?   release=$stream&arch=$basearch&repo=AppStream&infra=$infra
baseurl=https://mirrors.aliyun.com/$contentdir/$stream/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial


#更改CentOS-Stream-BaseOS.repo 文件，将baseurl参数中的地址改为https://mirrors.aliyun.com

[root@localhost yum.repos.d]# vi CentOS-Stream-BaseOS.repo 
[baseos]
name=CentOS Stream $releasever - BaseOS
#mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=BaseOS&infra=$infra
baseurl=https://mirrors.aliyun.com/$contentdir/$stream/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial


#更改CentOS-Stream-Extras.repo 文件，将baseurl参数中的地址改为https://mirrors.aliyun.com

[root@localhost yum.repos.d]# vi CentOS-Stream-Extras.repo 
[extras]
name=CentOS Stream $releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=extras&infra=$infra
baseurl=https://mirrors.aliyun.com/$contentdir/$stream/extras/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial

（2）配置openstack源

#在yum仓库文件夹下面创建openstack-victoria.repo文件

[root@localhost ~]# vi /etc/yum.repos.d/openstack-victoria.repo 
#写入以下内容
[virctoria]
name=virctoria
baseurl=https://mirrors.aliyun.com/centos/8-stream/cloud/x86_64/openstack-victoria/
gpgcheck=0
enabled=1

（3）清除缓存，重建缓存

[root@controller ~]# yum clean all
[root@controller ~]# yum makecache

网络配置

• 控制节点双网卡-------> 仅主机IP：10.10.10.10 Net外网IP：10.10.20.10
• 计算节点双网卡-------> 仅主机IP：10.10.10.20 Net外网IP：10.10.20.20

（1）安装network网络服务

#安装network，由于8系统自带的服务为NetworkManager,它会与neutron服务有冲突，所以安装network，关闭NetworkManager,并设置disable状态

[root@localhost ~]# dnf -y install network-scripts
[root@localhost ~]# systemctl disable --now NetManager

#启动network服务，设为开机自启动

[root@localhost ~]# systemctl enable --now network

（2） 配置静态IP

#ens33，以控制节点为例
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33
BOOTPROTO=static				#修改
ONBOOT=yes						#修改
IPADDR=10.10.10.10				#添加
NETMASK=255.255.255.0			#添加

#ens34，以控制节点为例
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens34
BOOTPROTO=static				#修改
ONBOOT=yes						#修改
IPADDR=10.10.20.10				#添加
NETMASK=255.255.255.0			#添加
GATEWAY=10.10.20.2				#添加
DNS1=8.8.8.8					#添加
DNS2=114.114.114.114			#添加

（3）重启网络，测试外网连通性

[root@localhost ~]# systemctl restart network
[root@localhost ~]# ping -c 3 www.baidu.com

主机配置

（1）修改主机名

#控制节点
[root@localhost ~]# hostnamectl set-hostname controller
[root@localhost ~]# bash
[root@controller ~]#

#计算节点
[root@localhost ~]# hostnamectl set-hostname compute
[root@localhost ~]# bash
[root@compute ~]#

（2）关闭防火墙

#关防火墙并设置disable开机禁启动
[root@controller ~]# systemctl disable --now firewalld

（3）关闭selinux安全子系统

#设置selinux并设置disable开机禁启动
[root@controller ~]# vi /etc/selinux/config 
SELINUX=disabled

#可通过getenforce命令查看selinux状态
[root@controller ~]# getenforce 
Disabled

（4）配置host主机映射

#控制节点
[root@controller ~]# cat >>etc/hosts<<EOF
> 10.10.10.10    controller
> 10.10.10.20    computer
> EOF

#计算节点
[root@compute ~]# cat >>etc/hosts<<EOF
> 10.10.10.10    controller
> 10.10.10.20    compute
> EOF

openstack存储库

#安装openstack-victoria版存储库
[root@controller ~]# dnf -y install centos-release-openstack-victoria

#升级节点上所有的安装包
[root@controller ~]# dnf -y upgrade 

#安装openstack客户端和openstack-selinux
[root@controller ~]# dnf -y install python3-openstackclient openstack-selinux 

五大服务

Chrony时间同步（双节点）

（1）查看系统是否安装chrony

[root@controller ~]# rpm -qa |grep chrony

#没有的话就安装
[root@controller ~]# dnf -y install chrony 

（2）编辑chrony配置文件

#控制节点
[root@controller ~]# vim /etc/chrony.conf
server ntp6.aliyun.com iburst		#添加与阿里云时间同步
allow 10.10.10.0/24			#添加

#计算节点
[root@controller ~]# vim /etc/chrony.conf
server controller iburst		#添加与控制节点时间同步

（3）重启时间同步服务，设置开机自启

[root@controller ~]# systemctl restart chronyd && systemctl enable chronyd

Mariadb数据库

（1）安装mariadb数据库

[root@controller ~]# dnf -y install mariadb mariadb-server python3-PyMySQL 

#启动mariadb数据库
[root@controller ~]# systemctl start mariadb

（2）创建openstack.cnf文件，编辑它

[root@controller ~]# vim /etc/my.cnf.d/openstack.cnf
[mysqld]
bind-address = 10.10.10.10		#绑定IP，如果后面换IP，这行可以删掉
default-storage-engine = innodb
innodb_file_per_table = on
max_connections = 4096
collation-server = utf8_general_ci
character-set-server = utf8

（3）初始化数据库

[root@controller ~]# mysql_secure_installation
Enter current password for root (enter for none):    #输入当前用户root密码，若为空直接回车
OK, successfully used password, moving on...
Set root password? [Y/n] y				# 是否设置root密码
New password:					# 输入新密码
Re-enter new password:			# 再次输入新密码
Remove anonymous users? [Y/n] y				# 是否删除匿名用户
Disallow root login remotely? [Y/n] n			# 是否禁用远程登录
Remove test database and access to it? [Y/n] y			# 是否删除数据库并访问它	
Reload privilege tables now? [Y/n] y		# 是否重新加载权限表

（4）重启数据库服务并设置开机自启

[root@controller ~]# systemctl restart mariadb && systemctl enable mariadb

RabbitMQ消息队列

注意：安装rabbitmq-server时，可能会报错，这是安装源里面没有libSDL，下载所需包，再安装rabbitmq-server就行了

下载命令：wget http://rpmfind.net/linux/centos/8-stream/PowerTools/x86_64/os/Packages/SDL2-2.0.10-2.el8.x86_64.rpm

安装命令：dnf -y install SDL2-2.0.10-2.el8.x86_64.rpm

（1）安装rabbitmq软件包

[root@controller ~]# dnf -y install rabbitmq-server 

（2）启动消息队列服务并设置开机自启动

[root@controller ~]# systemctl start rabbitmq-server && systemctl enable rabbitmq-server

(3) 添加openstack用户并设置密码

[root@controller ~]# rabbitmqctl add_user openstack 111111

(4) 配置openstack用户权限

[root@controller ~]# rabbitmqctl set_permissions openstack ".*" ".*" ".*"

（5）启用消息队列Web界面管理插件

[root@controller ~]# rabbitmq-plugins enable rabbitmq_management

#这一步启动后，ss -antlu命令查看端口会有一个15672的端口开启，可通过web界面登录RabbitMQ查看，网站地址：http://10.10.10.10:15672，用户和密码默认都是guest

Memcached缓存

（1）安装memcache软件包

[root@controller ~]# dnf -y install memcached python3-memcached 

（2）编辑memcache配置文件

[root@controller ~]# vim /etc/sysconfig/memcached
..........
OPTIONS="-l 127.0.0.1,::1,controller"          #修改这一行

（3）重启缓存服务并设置开机自启

[root@controller ~]# systemctl start memcached && systemctl enable memcached

Etcd集群

（1）安装etcd软件包

[root@controller ~]# dnf -y install etcd 

（2）编辑etcd配置文件

[root@controller ~]# vim /etc/etcd/etcd.conf
#修改如下
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="http://10.10.10.10:2380"
ETCD_LISTEN_CLIENT_URLS="http://10.10.10.10:2379"
ETCD_NAME="controller"
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.10.10.10:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://10.10.10.10:2379"
ETCD_INITIAL_CLUSTER="controller=http://10.10.10.10:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

（3）启动etcd服务并设置开机自启动

[root@controller ~]# systemctl start etcd && systemctl enable etcd

七大组件

Keystone认证

（1）数据库创库授权

#进入数据库
[root@controller ~]# mysql -u root -p111111

#创建keystone数据库
MariaDB [(none)]> CREATE DATABASE keystone;

#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' IDENTIFIED BY '111111';

（2）安装keystone软件包

[root@controller ~]# dnf -y install openstack-keystone httpd python3-mod_wsgi 

（3）编辑配置文件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/keystone/keystone.conf /etc/keystone/keystone.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/keystone/keystone.conf.bak >/etc/keystone/keystone.conf

#编辑
[root@controller ~]# vim /etc/keystone/keystone.conf
[database]
connection = mysql+pymysql://keystone:111111@controller/keystone

[token]
provider = fernet

（4）数据库初始化

[root@controller ~]# su -s /bin/sh -c "keystone-manage db_sync" keystone

（5）查看keystone数据库表信息

[root@controller ~]# mysql -uroot -p111111

MariaDB [(none)]> use keystone;
MariaDB [keystone]> show tables;
MariaDB [keystone]> quit

（6）初始化Fernet

[root@controller ~]# keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
[root@controller ~]# keystone-manage credential_setup --keystone-user keystone --keystone-group keystone

（7）引导身份认证

[root@controller ~]# keystone-manage bootstrap --bootstrap-password 111111 \
--bootstrap-admin-url http://controller:5000/v3/ \
--bootstrap-internal-url http://controller:5000/v3/ \
--bootstrap-public-url http://controller:5000/v3/ \
--bootstrap-region-id RegionOne

（8）配置Apache HTTP服务

#编辑httpd.conf文件
[root@controller ~]# vim /etc/httpd/conf/httpd.conf
ServerName controller		#添加这一行

<Directory />
    AllowOverride none
    Require all granted				#这一行改成这样
</Directory>

#创建wsgi-keystone.conf文件链接
[root@controller ~]# ln -s /usr/share/keystone/wsgi-keystone.conf /etc/httpd/conf.d/

（9）重启httpd服务并设置开机自启动

[root@controller ~]# systemctl restart httpd && systemctl enable httpd

（10）创建admin环境变量脚本

[root@controller ~]# vim /admin-openrc.sh
export OS_USERNAME=admin
export OS_PASSWORD=111111
export OS_PROJECT_NAME=admin
export OS_USER_DOMAIN_NAME=Default
export OS_PROJECT_DOMAIN_NAME=Default
export OS_AUTH_URL=http://controller:5000/v3
export OS_IDENTITY_API_VERSION=3
export OS_IMAGE_API_VERSION=2

#可通过source /admin-openrc.sh命令来导入环境变量，或./admin-openrc.sh命令，如果不想每次手动导入，可以修改.bashrc配置文件实现开机启动导入
[root@controller ~]# vim .bashrc 
source /admin-openrc.sh			#添加这一行

（11）创建域，项目，用户和角色

#创建域，已有默认域default，自己可随便创一个
[root@controller ~]# openstack domain create --description "An Example Domain" example

#创建service项目
[root@controller ~]# openstack project create --domain default --description "Service Project" service

#创建测试项目
[root@controller ~]# openstack project create --domain default --description "Demo Project" myproject

#创建用户，此命令执行会要求输入密码，输两次即可
[root@controller ~]# openstack user create --domain default --password-prompt myuser

#创建角色
[root@controller ~]# openstack role create myrole

#添加角色与项目，用户绑定
[root@controller ~]# openstack role add --project myproject --user myuser myrole

（12）验证token令牌

[root@controller ~]# openstack token issue

Glance镜像

(1) 数据库创库授权

#进入数据库
[root@controller ~]# mysql -u root -p111111

#创建glance数据库
MariaDB [(none)]> CREATE DATABASE glance;

#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' IDENTIFIED BY '111111';

(2) 安装glance软件包

注：安装报错，修改CentOS-Stream-PowerTools.repo源为enable=1，重新安装

[root@controller ~]# dnf install -y openstack-glance 

(3) 编辑配置文件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/glance/glance-api.conf /etc/glance/glance-api.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/glance/glance-api.conf.bak >/etc/glance/glance-api.conf


#编辑
[root@controller ~]# vim /etc/glance/glance-api.conf
[database]
connection = mysql+pymysql://glance:111111@controller/glance

[keystone_authtoken]
www_authenticate_uri  = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = glance
password = 111111

[paste_deploy]
flavor = keystone

[glance_store]
stores = file,http
default_store = file
filesystem_store_datadir = /var/lib/glance/images/

(4) 数据库初始化

[root@controller ~]# su -s /bin/sh -c "glance-manage db_sync" glance

(5) 查看glance数据库表信息

[root@controller ~]# mysql -uroot -p111111

MariaDB [(none)]> use glance;
MariaDB [keystone]> show tables;
MariaDB [keystone]> quit

(6) 创建glance用户和服务，关联admin角色

#创建glance用户
[root@controller ~]# openstack user create --domain default --password 111111 glance

#关联admin角色
[root@controller ~]# openstack role add --project service --user glance admin

#创建glance服务
[root@controller ~]# openstack service create --name glance --description "OpenStack Image" image

(7) 注册API接口

#public
[root@controller ~]# openstack endpoint create --region RegionOne image public http://controller:9292

#internal
[root@controller ~]# openstack endpoint create --region RegionOne image internal http://controller:9292

#admin
[root@controller ~]# openstack endpoint create --region RegionOne image admin http://controller:9292

(8) 查看服务端点

[root@controller ~]# openstack endpoint list

(9) 启动glance服务并设置开机自启

[root@controller ~]# systemctl start openstack-glance-api && systemctl enable openstack-glance-api

(10) 测试镜像功能

#此次采用的镜像为cirros-0.5.1-x86_64-disk.img,创建命令如下
[root@controller ~]# openstack image create "cirros" --file cirros-0.5.1-x86_64-disk.img --disk-format qcow2 --container-format bare --public

#创建成功后可通过openstack命令查看
[root@controller ~]# openstack image list

#进入glance数据库查看，存放在images表中
[root@controller ~]# mysql -uroot -p111111

MariaDB [(none)]> use glance;
MariaDB [glance]> select * from images\G;

#在/var/lib/glance/images/目录下可以看到镜像文件，如果要删除此镜像需要删除数据库信息，再删除镜像文件
[root@controller ~]# ls /var/lib/glance/images/

Placement放置

(1) 数据库创库授权

#进入数据库
[root@controller ~]# mysql -u root -p111111

#创建placement数据库
MariaDB [(none)]> CREATE DATABASE placement;

#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON placement.* TO 'placement'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON placement.* TO 'placement'@'%' IDENTIFIED BY '111111';

(2) 安装placement软件包

[root@controller ~]# dnf install -y openstack-placement-api 

(3) 编辑配置文件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/placement/placement.conf /etc/placement/placement.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/placement/placement.conf.bak >/etc/placement/placement.conf

#编辑
[root@controller ~]# vim /etc/placement/placement.conf
[placement_database]
connection = mysql+pymysql://placement:111111@controller/placement

[api]
auth_strategy = keystone

[keystone_authtoken]
auth_url = http://controller:5000/v3
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = placement
password = 111111

(4) 数据库初始化

[root@controller ~]# su -s /bin/sh -c "placement-manage db sync" placement

(5) 查看placement数据库表信息

[root@controller ~]# mysql -uroot -p111111

MariaDB [(none)]> use placement;
MariaDB [keystone]> show tables;
MariaDB [keystone]> quit

(6) 创建placement用户和服务，关联admin角色

#创建placement用户
[root@controller ~]# openstack user create --domain default --password 111111 placement

#关联admin角色
[root@controller ~]# openstack role add --project service --user placement admin

#创建placement服务
[root@controller ~]# openstack service create --name placement --description "Placement API" placement

(7) 注册API接口

#public
[root@controller ~]# openstack endpoint create --region RegionOne placement internal http://controller:8778

#internal
[root@controller ~]# openstack endpoint create --region RegionOne placement public http://controller:8778

#admin
[root@controller ~]# openstack endpoint create --region RegionOne placement admin http://controller:8778

(8) 查看服务端点

[root@controller ~]# openstack endpoint list

(9) 重启httpd服务

[root@controller ~]# systemctl restart httpd

检测placement服务状态

[root@controller ~]# placement-status upgrade check

Nova计算

1,控制节点(1)

(1) 数据库创库授权

#进入数据库
[root@controller ~]# mysql -u root -p111111

#创建nova_api，nova和nova_cell0数据库
MariaDB [(none)]> CREATE DATABASE nova_api;
MariaDB [(none)]> CREATE DATABASE nova;
MariaDB [(none)]> CREATE DATABASE nova_cell0;

#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'%' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'%' IDENTIFIED BY '111111';

(2) 安装nova软件包

[root@controller ~]# dnf install -y openstack-nova-api openstack-nova-conductor openstack-nova-novncproxy openstack-nova-scheduler

(3) 编辑配置文件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/nova/nova.conf /etc/nova/nova.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/nova/nova.conf.bak >/etc/nova/nova.conf

#编辑
[root@controller ~]# vim /etc/nova/nova.conf
[DEFAULT]
enabled_apis = osapi_compute,metadata
transport_url = rabbit://openstack:111111@controller:5672/
my_ip = 10.10.10.10				#本机IP，如果将来换IP，这地方一定要改

[api_database]
connection = mysql+pymysql://nova:111111@controller/nova_api

[database]
connection = mysql+pymysql://nova:111111@controller/nova

[api]
auth_strategy = keystone

[keystone_authtoken]
www_authenticate_uri = http://controller:5000/
auth_url = http://controller:5000/
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = nova
password = 111111

[vnc]
enabled = true
server_listen = $my_ip
server_proxyclient_address = $my_ip

[glance]
api_servers = http://controller:9292

[oslo_concurrency]
lock_path = /var/lib/nova/tmp

[placement]
region_name = RegionOne
project_domain_name = Default
project_name = service
auth_type = password
user_domain_name = Default
auth_url = http://controller:5000/v3
username = placement
password = 111111

(4) 数据库初始化

# 同步nova_api数据库
[root@controller ~]# su -s /bin/sh -c "nova-manage api_db sync" nova

# 同步nova_cell0数据库
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 map_cell0" nova

# 创建cell1
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 create_cell --name=cell1 --verbose" nova

# 同步nova数据库
[root@controller ~]# su -s /bin/sh -c "nova-manage db sync" nova

(5) 创建nova用户和服务，关联admin角色

#创建nova用户
[root@controller ~]# openstack user create --domain default --password 111111 nova

#关联admin角色
[root@controller ~]# openstack role add --project service --user nova admin

#创建nova服务
[root@controller ~]# openstack service create --name nova --description "OpenStack Compute" compute

(6) 注册API接口

#public
[root@controller ~]# openstack endpoint create --region RegionOne compute public http://controller:8774/v2.1

#internal
[root@controller ~]# openstack endpoint create --region RegionOne compute internal http://controller:8774/v2.1

#admin
[root@controller ~]# openstack endpoint create --region RegionOne compute admin http://controller:8774/v2.1

(7) 查看服务端点

[root@controller ~]# openstack endpoint list

(8) 验证nova_cell0和cell1是否添加成功

[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 list_cells" nova

(9) 启动nova所有服务并设为开机自启

[root@controller ~]# systemctl enable --now openstack-nova-api openstack-nova-scheduler openstack-nova-conductor openstack-nova-novncproxy

(10) 查看nova服务是否启动

[root@controller ~]# nova service-list

#一般只会显示两个服务：nova-scheduler和nova-conductor，这是因为上面这条命令是由nova-api接收，而它控制着nova-scheduler和nova-conductor服务，如果nova-api未开启，那这两个服务也会down掉，nova-novncproxy服务则是通过查看端口号的形式，示例如下：
[root@controller ~]# netstat -lntup | grep 6080
tcp        0      0 0.0.0.0:6080            0.0.0.0:*               LISTEN      1456/python3   
[root@controller ~]# ps -ef | grep 1456			
nova        1456       1  0 18:29 ?        00:00:05 /usr/bin/python3 /usr/bin/nova-novncproxy --web /usr/share/novnc/
root       27724   26054  0 20:51 pts/0    00:00:00 grep --color=auto 1456

(11) 如何通过web界面查看

#如果不配置域名解析，就直接用ip
http://10.10.10.10:6080

#如果要配置域名解析，在电脑C:\Windows\System32\drivers\etc目录下里面的hosts文件里添加
10.10.10.10		controller
10.10.10.20 	compute
#再访问
http://controller:6080

2,计算节点

(1) 安装nova软件包

[root@compute ~]# dnf install -y openstack-nova-compute

(2) 编辑配置文件

#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/nova/nova.conf /etc/nova/nova.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/nova/nova.conf.bak >/etc/nova/nova.conf

#编辑
[root@compute ~]# vim /etc/nova/nova.conf
[DEFAULT]
enabled_apis = osapi_compute,metadata
transport_url = rabbit://openstack:111111@controller
my_ip = 10.10.10.20				#本机IP，如果将来换IP，这地方一定要改

[api]
auth_strategy = keystone

[keystone_authtoken]
www_authenticate_uri = http://controller:5000/
auth_url = http://controller:5000/
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = nova
password = 111111

[vnc]
enabled = true
server_listen = 0.0.0.0
server_proxyclient_address = $my_ip
novncproxy_base_url = http://controller:6080/vnc_auto.html

[glance]
api_servers = http://controller:9292

[oslo_concurrency]
lock_path = /var/lib/nova/tmp

[placement]
region_name = RegionOne
project_domain_name = Default
project_name = service
auth_type = password
user_domain_name = Default
auth_url = http://controller:5000/v3
username = placement
password = 111111

(3) 确定计算节点是否支持虚拟机的硬件加速

#如果此命令返回值是别的数字，计算节点支持硬件加速；如果此命令返回值是0，计算节点不支持硬件加速，需要配置[libvirt]
[root@compute ~]# egrep -c '(vmx|svm)' /proc/cpuinfo

#配置[libvirt]
[root@compute ~]# vim /etc/nova/nova.conf
[libvirt]
virt_type = qemu

(4) 启动计算节点nova服务并设置开机自启动

[root@compute ~]# systemctl enable --now libvirtd.service openstack-nova-compute.service

控制节点（2）

(5) 将计算节点添加到单元数据库

#确认数据库中存在计算主机
[root@controller ~]# openstack compute service list --service nova-compute

#控制节点发现计算节点
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 discover_hosts --verbose" nova

(6) 设置发现间隔

[root@controller ~]# vim /etc/nova/nova.conf
[scheduler]
discover_hosts_in_cells_interval = 300

Neutron网络

(1) 数据库创库授权

#进入数据库
[root@controller ~]# mysql -u root -p111111

#创建neutron数据库
MariaDB [(none)] CREATE DATABASE neutron;

#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' IDENTIFIED BY '111111';

(2) 创建neutron用户和服务，关联admin角色

#创建neutron用户
[root@controller ~]# openstack user create --domain default --password 111111 neutron

#关联admin角色
[root@controller ~]# openstack role add --project service --user neutron admin

#创建neutron服务
[root@controller ~]# openstack service create --name neutron --description "OpenStack Networking" network

(3) 注册API接口

#public
[root@controller ~]# openstack endpoint create --region RegionOne network public http://controller:9696

#internal
[root@controller ~]# openstack endpoint create --region RegionOne network internal http://controller:9696

#admin
[root@controller ~]# openstack endpoint create --region RegionOne network admin http://controller:9696

(4) 查看服务端点

[root@controller ~]# openstack endpoint list

控制节点公有网络

(1) 安装neutron软件包

[root@controller ~]# dnf -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-linuxbridge ebtables

(2) 编辑neutron配置文件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf

#编辑
[root@controller ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
core_plugin = ml2
service_plugins =
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
notify_nova_on_port_status_changes = true
notify_nova_on_port_data_changes = true

[database]
connection = mysql+pymysql://neutron:111111@controller/neutron

[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111

[nova]								#如果配置文件没有这个参数，就直接加
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = 111111

[oslo_concurrency]
lock_path = /var/lib/neutron/tmp

(3) 编辑ml2插件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/ml2_conf.ini.bak >/etc/neutron/plugins/ml2/ml2_conf.ini

#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]
type_drivers = flat,vlan
tenant_network_types =
mechanism_drivers = linuxbridge
extension_drivers = port_security

[ml2_type_flat]
flat_networks = provider

[securitygroup]
enable_ipset = true

(4) 配置Linux网桥代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34		#这里选择提供给实例的net网卡

[vxlan]
enable_vxlan = false

[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver

(5) 配置DHCP代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/dhcp_agent.ini /etc/neutron/dhcp_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/dhcp_agent.ini.bak >/etc/neutron/dhcp_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/dhcp_agent.ini
[DEFAULT]
interface_driver = linuxbridge
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
enable_isolated_metadata = true

(6) 设置网桥过滤器

#修改系统参数配置文件
[root@controller ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf

#加载br_netfilter模块
[root@controller ~]# modprobe br_netfilter

#检查
[root@controller ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1			#出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1			#出现这个则配置成功

(7) 配置元数据代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/metadata_agent.ini /etc/neutron/metadata_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/metadata_agent.ini.bak >/etc/neutron/metadata_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/metadata_agent.ini
[DEFAULT]
nova_metadata_host = controller
metadata_proxy_shared_secret = METADATA_SECRET		

#'METADATA_SECRET'为密码，可自行定义。但要与后面配置nova中的元数据参数一致

(8) 配置计算服务以使用网络服务

#在[neutron]部分，配置访问参数，启用元数据代理
[root@controller ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111
service_metadata_proxy = true
metadata_proxy_shared_secret = METADATA_SECRET		#密码要一致

(9) 创建网络服务初始化脚本链接

[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini

(10) 数据库初始化

[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron

(11) 重启nova的API服务

[root@controller ~]# systemctl restart openstack-nova-api.service

(12) 启动neutron服务并设置开机自启

[root@controller ~]# systemctl enable --now neutron-server.service \
neutron-linuxbridge-agent.service neutron-dhcp-agent.service \
neutron-metadata-agent.service

计算节点公有网络

(1) 安装neutron软件包

[root@compute ~]# dnf install -y openstack-neutron-linuxbridge ebtables ipset

(2) 编辑neutron配置文件

#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf

#编辑
[root@compute ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone

[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111

[oslo_concurrency]
lock_path = /var/lib/neutron/tmp

(3) 配置Linux网桥代理

#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34		#这里选择提供给实例的net网卡

[vxlan]
enable_vxlan = false

[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver

(4) 设置网桥过滤器

#修改系统参数配置文件
[root@compute ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf

#加载br_netfilter模块
[root@compute ~]# modprobe br_netfilter

#检查
[root@compute ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1			#出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1			#出现这个则配置成功

(5) 配置计算服务以使用网络服务

#在[neutron]部分，配置访问参数，启用元数据代理
[root@compute ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111

(6) 重启nova的API服务

[root@compute ~]# systemctl restart openstack-nova-api.service

(7) 启动Linux网桥服务并设置开机自启

[root@compute ~]# systemctl enable neutron-linuxbridge-agent.service

公有网络服务是否正常运行

(8) 控制节点查看网络代理服务列表

#控制节点查看网络代理服务列表
[root@controller ~]# openstack network agent list

#一般成功后会出现Metadata agent，DHCP agent,两个Linux bridge agent一共四个代理，一个Linux bridge agent属于controlller,另一个属于compute

控制节点私有网络

(1) 安装neutron软件包

[root@controller ~]# dnf -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-linuxbridge ebtables

(2) 编辑neutron配置文件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf

#编辑
[root@controller ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
core_plugin = ml2
service_plugins = router
allow_overlapping_ips = true
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
notify_nova_on_port_status_changes = true
notify_nova_on_port_data_changes = true

[database]
connection = mysql+pymysql://neutron:111111@controller/neutron

[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111

[nova]								#如果配置文件没有这个参数，就直接加
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = 111111

[oslo_concurrency]
lock_path = /var/lib/neutron/tmp

(3) 编辑ml2插件

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/ml2_conf.ini.bak >/etc/neutron/plugins/ml2/ml2_conf.ini

#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]
type_drivers = flat,vlan,vxlan
tenant_network_types = vxlan
mechanism_drivers = linuxbridge,l2population
extension_drivers = port_security

[ml2_type_flat]
flat_networks = provider

[ml2_type_vxlan]
vni_ranges = 1:1000

[securitygroup]
enable_ipset = true

(4) 配置Linux网桥代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34		#这里选择提供给实例的net网卡

[vxlan]
enable_vxlan = true
local_ip = 10.10.10.10
l2_population = true

[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver

(5) 设置网桥过滤器

#修改系统参数配置文件
[root@controller ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf

#加载br_netfilter模块
[root@controller ~]# modprobe br_netfilter

#检查
[root@controller ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1			#出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1			#出现这个则配置成功

(6) 配置DHCP代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/dhcp_agent.ini /etc/neutron/dhcp_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/dhcp_agent.ini.bak >/etc/neutron/dhcp_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/dhcp_agent.ini
[DEFAULT]
interface_driver = linuxbridge
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
enable_isolated_metadata = true

(7) 配置第三层代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/l3_agent.ini /etc/neutron/l3_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/l3_agent.ini.bak > /etc/neutron/l3_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/l3_agent.ini
[DEFAULT]
interface_driver = linuxbridge

(8) 配置元数据代理

#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/metadata_agent.ini /etc/neutron/metadata_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/metadata_agent.ini.bak >/etc/neutron/metadata_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/metadata_agent.ini
[DEFAULT]
nova_metadata_host = controller
metadata_proxy_shared_secret = METADATA_SECRET		

#'METADATA_SECRET'为密码，可自行定义。但要与后面配置nova中的元数据参数一致

(9) 配置计算服务以使用网络服务

#在[neutron]部分，配置访问参数，启用元数据代理
[root@controller ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111
service_metadata_proxy = true
metadata_proxy_shared_secret = METADATA_SECRET		#密码要一致

(10) 创建网络服务初始化脚本链接

[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini

(11) 数据库初始化

[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron

(12) 重启nova的API服务

[root@controller ~]# systemctl restart openstack-nova-api.service

(13) 启动neutron服务并设置开机自启

[root@controller ~]# systemctl enable --now neutron-server.service \
neutron-linuxbridge-agent.service neutron-dhcp-agent.service \
neutron-metadata-agent.service neutron-l3-agent.service

计算节点私有网络

(1) 安装neutron软件包

[root@compute ~]# dnf install -y openstack-neutron-linuxbridge ebtables ipset

(2) 编辑neutron配置文件

#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf

#编辑
[root@compute ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone

[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111

[oslo_concurrency]
lock_path = /var/lib/neutron/tmp

(3) 配置Linux网桥代理

#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini

#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34		#这里选择提供给实例的net网卡

[vxlan]
enable_vxlan = true
local_ip = 10.10.10.20
l2_population = true

[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver

(4) 设置网桥过滤器

#修改系统参数配置文件
[root@compute ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf

#加载br_netfilter模块
[root@compute ~]# modprobe br_netfilter

#检查
[root@compute ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1			#出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1			#出现这个则配置成功

(5) 配置计算服务以使用网络服务

#在[neutron]部分，配置访问参数，启用元数据代理
[root@compute ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111

(6) 重启nova的API服务

[root@compute ~]# systemctl restart openstack-nova-api.service

(7) 启动Linux网桥服务并设置开机自启

[root@compute ~]# systemctl enable neutron-linuxbridge-agent.service

私有网络服务是否正常运行

(8) 控制节点查看网络代理服务列表

#控制节点查看网络代理服务列表
[root@controller ~]# openstack network agent list

#一般成功后会出现Metadata agent，DHCP agent,L3 agent,两个Linux bridge agent一共五个代理，一个Linux bridge agent属于controlller,另一个属于compute

Dashboard仪表盘

(1) 安装dashboard软件包

[root@controller ~]# dnf install -y openstack-dashboard

(2) 编辑dashboard配置文件

#此文件内所有选项与参数用命令模式搜索，有就修改，没有就添加
[root@controller ~]# vim /etc/openstack-dashboard/local_settings

OPENSTACK_HOST = "controller"

#不配域名解析就要把IP写进去
ALLOWED_HOSTS = ['controller'，‘compute’,'10.10.10.10','10.10.10.20']

SESSION_ENGINE = 'django.contrib.sessions.backends.cache'

CACHES = {
    'default': {
         'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
         'LOCATION': 'controller:11211',
    },
}

OPENSTACK_KEYSTONE_URL = "http://%s/identity/v3" % OPENSTACK_HOST

OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = True

OPENSTACK_API_VERSIONS = {
    "identity": 3,
    "image": 2,
    "volume": 3,
}

OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = "Default"


OPENSTACK_KEYSTONE_DEFAULT_ROLE = "user"

OPENSTACK_NEUTRON_NETWORK = {
    'enable_router': False,
    'enable_quotas': False,
    'enable_distributed_router': False,
    'enable_ha_router': False,
    'enable_lb': False,
    'enable_firewall': False,
    'enable_vpn': False,
    'enable_fip_topology_check': False,
}

TIME_ZONE = "Asia/Shanghai"

(3) 配置http服务

[root@controller ~]# vi /etc/httpd/conf.d/openstack-dashboard.conf

WSGIApplicationGroup %{GLOBAL}			#添加这行

#编辑dashboard配置文件
[root@controller ~]# vim /etc/openstack-dashboard/local_settings 

WEBROOT = '/dashboard/'					#添加这行

(4) 重启http和缓存服务

[root@controller ~]# systemctl restart httpd.service memcached.service

(5) 登录web界面

#如果不配置域名解析，就直接用ip
http://10.10.10.10/dashboard

#如果要配置域名解析，在电脑C:\Windows\System32\drivers\etc目录下里面的hosts文件里添加
10.10.10.10		controller
10.10.10.20 	compute
#再访问
http://controller/dashboard

Cinder存储

控制节点

(1) 数据库创库授权

#进入数据库
[root@controller ~]# mysql -u root -p111111

#创建cinder数据库
MariaDB [(none)] CREATE DATABASE cinder;

#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'%' IDENTIFIED BY '111111';

(2) 编辑配置文件

#复制一份去掉注释
[root@controller ~]# cp /etc/cinder/cinder.conf /etc/cinder/cinder.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/cinder/cinder.conf.bak > /etc/cinder/cinder.conf

#编辑
[root@controller ~]# vim /etc/cinder/cinder.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
my_ip = 10.10.10.10

[database]
connection = mysql+pymysql://cinder:111111@controller/cinder

[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = cinder
password = 111111

[oslo_concurrency]
lock_path = /var/lib/cinder/tmp

(3) 数据库初始化

[root@controller ~]# su -s /bin/sh -c "cinder-manage db sync" cinder

(4) 查看cinder数据库表信息

[root@controller ~]# mysql -uroot -p111111

MariaDB [(none)]> use cinder;
MariaDB [cinder]> show tables;
MariaDB [cinder]> quit

(5) 创建cinder用户和服务，关联admin角色

#创建cinder用户
[root@controller ~]# openstack user create --domain default --password 111111 placement

#关联admin角色
[root@controller ~]# openstack role add --project service --user cinder admin

#创建cinderv2,cinderv3服务
[root@controller ~]# openstack service create --name cinderv2 \>   --description "OpenStack Block Storage" volumev2
[root@controller ~]# openstack service create --name cinderv3 \>   --description "OpenStack Block Storage" volumev3

(6) 注册API接口

cinderv2的服务端点

#public
[root@controller ~]# openstack endpoint create --region RegionOne \
>   volumev2 public http://controller:8776/v2/%\(project_id\)s

#internal
[root@controller ~]# openstack endpoint create --region RegionOne \
>   volumev2 internal http://controller:8776/v2/%\(project_id\)s

#admin
[root@controller ~]# openstack endpoint create --region RegionOne \
>   volumev2 admin http://controller:8776/v2/%\(project_id\)s

cinderv3的服务端点

#public
[root@controller ~]# openstack endpoint create --region RegionOne \
>   volumev3 public http://controller:8776/v3/%\(project_id\)s

#internal
[root@controller ~]# openstack endpoint create --region RegionOne \
>   volumev3 internal http://controller:8776/v3/%\(project_id\)s

#admin
[root@controller ~]# openstack endpoint create --region RegionOne \
>   volumev3 admin http://controller:8776/v3/%\(project_id\)s

(7) 查看服务端点

[root@controller ~]# openstack endpoint list

(8) 配置计算服务使用块存储

#编辑nova配置文件
[root@controller cinder]# vi /etc/nova/nova.conf
[cinder]
os_region_name = RegionOne

#重启nova
[root@controller ~]# systemctl restart openstack-nova-api.service

(9) 启动cinder服务并设置开机自启

[root@controller ~]# systemctl enable --now openstack-cinder-api.service openstack-cinder-scheduler.service

计算节点（关闭虚拟机添加一块50G硬盘）

(1) 查看磁盘

[root@compute ~]# fdisk --list

(2) 安装 LVM 包

[root@compute ~]# dnf -y install lvm2 device-mapper-persistent-data

(3) 创建 LVM 物理卷/dev/sdb

[root@compute ~]# pvcreate /dev/sdb

(4) 创建 LVM 卷组cinder-volumes

[root@compute ~]# vgcreate cinder-volumes /dev/sdb

(5) 修改LVM配置

#复制一份去掉注释
[root@compute ~]# cp /etc/lvm/lvm.conf /etc/lvm/lvm.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/lvm/lvm.conf.bak > /etc/lvm/lvm.conf

#编辑
[root@compute ~]# vi /etc/lvm/lvm.conf
devices {
        filter = [ "a/sda/",a/sdb/", "r/.*/"]
}

(6) 安装cinder相关软件包

[root@compute ~]# dnf install -y openstack-cinder targetcli python3-keystone

(7) 编辑cinder配置文件

#复制一份去掉注释
[root@compute ~]# cp /etc/cinder/cinder.conf /etc/cinder/cinder.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/cinder/cinder.conf.bak > /etc/cinder/cinder.conf

#编辑
[root@compute ~]# vim /etc/cinder/cinder.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
my_ip = 10.10.10.20
enabled_backends = lvm
glance_api_servers = http://controller:9292

[database]
connection = mysql+pymysql://cinder:111111@controller/cinder

[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = cinder
password = 111111

[lvm]					#没有就添加
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_group = cinder-volumes				#要与创建的卷组名对应
target_protocol = iscsi
target_helper = lioadm

[oslo_concurrency]
lock_path = /var/lib/cinder/tmp

(8) 启动cinder服务并设置开机自启

[root@compute ~]# systemctl enable --now openstack-cinder-volume.service target.service

(9) 返回控制节点，查看服务列表

[root@controller ~]# openstack volume service list
#显示这样就行
+------------------+-------------+------+---------+-------+----------------------------+
| Binary           | Host        | Zone | Status  | State | Updated At                 |
+------------------+-------------+------+---------+-------+----------------------------+
| cinder-scheduler | controller  | nova | enabled | up    | 2023-05-11T08:12:03.000000 |
| cinder-volume    | compute@lvm | nova | enabled | up    | 2023-05-11T08:12:02.000000 |
+------------------+-------------+------+---------+-------+----------------------------+

至此，openstack云平台搭建V版已全部完成